A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other wrought titanium, nesoi
NSN 6145-01-244-6356
NSN 5965-01-633-8849
NSN 5960-00-636-0532
NSN 5950-00-784-0324
NSN 5915-01-384-7760
NSN 6150-00-700-0554
NSN 2925-01-041-1173
NSN 5855-00-014-5008
NSN 6320-00-164-4087
NSN 6220-00-839-2589
NSN 5950-00-316-6309
NSN 5835-00-233-6327