A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5998-01-359-4236
NSN 6320-01-512-2031
NSN 6645-01-114-8044
NSN 5950-01-069-3861
NSN 5998-01-381-5271
NSN 6645-01-145-7357
NSN 6145-01-538-3690
NSN 5998-01-053-7983
NSN 6145-01-369-8025
NSN 6620-01-486-8002
NSN 2925-01-340-5504
NSN 5960-00-601-3118