Used on f-5 freedom fighter
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-01-222-0491
NSN 5945-01-587-5905
NSN 5910-01-600-1181
NSN 6130-00-236-7926
NSN 6650-00-597-7313
NSN 5920-01-218-6191
NSN 5895-01-529-5440
NSN 5945-00-124-2027
NSN 6685-00-223-7320
NSN 6320-00-857-4073
NSN 6650-00-337-3597
NSN 6220-01-140-3527