A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5895-01-346-9018
NSN 7035-00-205-8739
NSN 2925-00-906-0421
NSN 6130-00-073-2994
NSN 5895-00-889-1084
NSN 5920-00-958-7202
NSN 6145-01-490-5654
NSN 5985-01-244-6180
NSN 5920-01-107-6614
NSN 6650-01-210-8906
NSN 6650-00-418-2129
NSN 5975-01-053-1331