No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6320-01-574-1915
NSN 5965-01-434-4095
NSN 5855-01-623-4517
NSN 5855-01-540-1185
NSN 6150-00-233-5833
NSN 6650-01-620-4116
NSN 5910-00-456-0235
NSN 4140-00-061-3110
NSN 6620-01-430-2212
NSN 6620-00-218-4959
NSN 5925-01-273-2161
NSN 7035-00-922-5700