A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other wrought titanium, nesoi
NSN 6135-00-548-2765
NSN 6620-01-389-3324
NSN 5998-01-148-2150
NSN 6150-00-884-4740
NSN 5965-00-372-2537
NSN 6220-01-246-3240
NSN 4140-01-364-0109
NSN 5935-01-105-6708
NSN 6105-01-357-1963
NSN 5975-01-522-2885
NSN 5930-01-056-4621
NSN 6150-01-474-6532