No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 2925-00-890-3240
NSN 6685-01-325-9848
NSN 5835-01-200-7153
NSN 6650-01-089-7777
NSN 5935-01-203-4432
NSN 6150-01-425-1947
NSN 6620-01-350-5103
NSN 5910-01-218-0808
NSN 5910-01-426-8741
NSN 6645-01-559-8314
NSN 5930-01-463-8744
NSN 5855-01-557-7967