No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5945-01-305-3776
NSN 5965-01-084-2385
NSN 5975-00-775-6432
NSN 5905-00-288-7325
NSN 4140-01-123-8801
NSN 5960-01-539-1956
NSN 5998-00-483-4912
NSN 5985-01-483-9958
NSN 5855-01-535-7127
NSN 6240-00-956-1428
NSN 5985-01-433-2833
NSN 5915-01-432-7593