No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6130-00-067-4097
NSN 6150-00-643-5281
NSN 5998-01-472-2209
NSN 6320-00-905-0543
NSN 5920-01-206-3977
NSN 6220-01-176-9139
NSN 5895-00-456-0830
NSN 5960-01-485-2467
NSN 6145-00-493-4073
NSN 5935-01-432-0692
NSN 6145-01-357-8430
NSN 5998-00-367-2691