No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 6610-01-256-7938
NSN 5835-01-317-4840
NSN 5905-01-538-9600
NSN 6130-00-171-7400
NSN 5990-00-452-9194
NSN 4140-01-389-0595
NSN 5920-01-268-2648
NSN 5910-01-547-1752
NSN 6105-00-291-0154
NSN 6645-01-091-9363
NSN 5915-01-305-3553
NSN 5910-01-304-2021