A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5925-00-133-2963
NSN 6150-01-632-9282
NSN 6620-01-285-4685
NSN 5915-00-078-8561
NSN 4140-01-074-2588
NSN 2925-01-199-7394
NSN 5975-00-516-1771
NSN 4140-01-301-9397
NSN 7035-00-270-5519
NSN 5935-01-576-8158
NSN 6610-00-927-7415
NSN 5960-01-505-2426