No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5925-01-272-4330
NSN 5915-01-360-0924
NSN 6150-01-048-4697
NSN 5895-01-391-7200
NSN 5950-01-643-0625
NSN 5935-01-541-4521
NSN 5855-01-608-2417
NSN 5935-01-497-5290
NSN 6240-00-295-2999
NSN 6610-01-263-8999
NSN 5920-00-467-6805
NSN 5945-00-962-0506