No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5835-00-427-2772
NSN 6620-00-246-5159
NSN 7035-01-155-0153
NSN 5990-00-477-1362
NSN 5996-01-354-0502
NSN 4140-01-047-4093
NSN 5965-00-006-3104
NSN 4140-01-442-7799
NSN 6620-00-905-6590
NSN 6105-01-113-7039
NSN 5999-00-791-5332
NSN 5835-01-572-9308