Free of mercury contamination
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6620-01-053-6650
NSN 5835-01-200-7153
NSN 5935-01-154-4705
NSN 6240-01-139-7467
NSN 5996-01-167-9234
NSN 2925-01-476-3224
NSN 5985-00-001-4077
NSN 6320-00-004-9158
NSN 5985-00-097-7634
NSN 6110-00-363-3974
NSN 5996-01-329-2499
NSN 5855-01-054-5243