A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Copper screws, nuts, bolts, rivets, and other fasteners not threaded
NSN 6135-00-112-8637
NSN 5960-01-433-7565
NSN 5985-00-137-4328
NSN 6110-01-033-4076
NSN 5975-01-292-7864
NSN 5930-01-395-7054
NSN 5835-01-185-1102
NSN 6135-01-124-2376
NSN 2925-01-457-5649
NSN 6685-00-209-4400
NSN 5999-01-159-9946
NSN 6610-01-608-5285