A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5895-01-558-2868
NSN 6110-01-382-9706
NSN 6650-01-378-7875
NSN 6645-00-169-1527
NSN 6685-01-322-0139
NSN 6620-01-296-0873
NSN 5835-01-631-3940
NSN 6150-01-075-2974
NSN 6145-01-357-3967
NSN 6320-00-336-9123
NSN 7035-00-215-3272
NSN 6685-00-083-6602