A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of vulcanized rubber other than hard rubber, nesoi
NSN 6105-00-376-2174
NSN 2925-01-157-9204
NSN 5935-01-465-4267
NSN 2925-01-446-6976
NSN 7035-00-941-4949
NSN 5960-01-502-6270
NSN 5975-01-497-6441
NSN 5930-01-480-8184
NSN 5950-00-957-0712
NSN 5945-01-251-3732
NSN 5975-01-319-0927
NSN 6145-00-724-1107