Color is off-white
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 2925-01-213-2983
NSN 5920-01-233-3770
NSN 6620-01-323-6091
NSN 2925-01-311-7840
NSN 6135-01-503-1688
NSN 5920-01-370-3448
NSN 5998-00-410-7347
NSN 2925-00-544-2545
NSN 5835-01-254-8584
NSN 6650-01-415-5573
NSN 5998-00-118-0318
NSN 5998-01-249-7850