No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6145-00-988-6906
NSN 5996-01-109-1586
NSN 5910-00-010-8720
NSN 5910-01-615-7062
NSN 5905-01-442-5214
NSN 6105-00-683-1000
NSN 6135-01-088-4301
NSN 5895-00-548-0124
NSN 5985-00-518-1748
NSN 6240-01-304-1596
NSN 4140-00-552-7370
NSN 5920-01-056-7603