No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6610-01-329-0969
NSN 5998-01-432-0101
NSN 5950-00-588-2518
NSN 6645-00-222-2785
NSN 4140-01-065-7181
NSN 5920-01-432-2428
NSN 5999-01-278-4177
NSN 5990-00-554-0366
NSN 4140-01-143-7784
NSN 5975-01-236-5722
NSN 5905-00-468-8008
NSN 5960-01-086-6736