No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5930-00-276-9289
NSN 6130-00-662-8557
NSN 6685-01-609-5519
NSN 6110-00-592-4040
NSN 6135-01-493-2912
NSN 5915-01-062-0592
NSN 5965-01-462-1800
NSN 5905-01-260-7950
NSN 2925-01-304-2127
NSN 6220-00-439-6153
NSN 5990-00-497-9234
NSN 6650-01-130-6799