USED-ON-235-0011
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6685-00-966-4446
NSN 5925-01-276-2855
NSN 5975-01-428-3305
NSN 5935-01-407-7381
NSN 6130-00-467-5014
NSN 5960-00-081-2559
NSN 6150-01-101-3185
NSN 6110-00-248-7475
NSN 6620-01-546-4942
NSN 5915-01-515-3092
NSN 6320-01-006-6138
NSN 6220-01-254-9432