No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Articles of plastics & articles of other materials of heading 3901 to 3914, nesoi
NSN 6685-00-375-8689
NSN 5999-00-567-4038
NSN 5990-01-344-7778
NSN 5950-00-692-8010
NSN 6110-01-169-9053
NSN 5855-01-225-5855
NSN 6220-00-186-8565
NSN 6610-01-623-6228
NSN 6685-01-147-4532
NSN 5975-00-919-3715
NSN 5950-00-580-6170
NSN 5925-00-304-3315