No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-01-544-9580
NSN 5998-01-631-2200
NSN 5996-01-237-4501
NSN 6240-01-399-2493
NSN 5920-01-368-3720
NSN 6135-00-223-9563
NSN 6135-01-478-9316
NSN 6650-00-273-8732
NSN 5910-01-256-4726
NSN 5990-00-458-9643
NSN 6150-00-985-8398
NSN 6610-00-195-7517