No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5920-01-423-8595
NSN 6645-01-172-6838
NSN 6240-01-179-2898
NSN 7035-00-541-8516
NSN 6320-00-261-9136
NSN 4140-01-323-4279
NSN 5996-01-410-8538
NSN 6130-01-430-2887
NSN 5915-00-855-4474
NSN 5920-01-045-1484
NSN 5895-01-399-0240
NSN 6150-01-249-8080