Application-fender washer
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5945-01-495-5893
NSN 6610-00-170-6715
NSN 5835-01-010-8143
NSN 5920-01-658-2325
NSN 5975-01-351-6846
NSN 5855-01-357-4335
NSN 4140-00-451-8374
NSN 5855-00-185-1560
NSN 5996-01-560-6587
NSN 6130-00-364-2016
NSN 6610-00-115-2142
NSN 5990-01-100-1840