A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 2925-00-964-7128
NSN 5905-01-468-5532
NSN 5975-01-096-4708
NSN 5945-00-949-2422
NSN 5925-01-082-0591
NSN 6650-01-629-6469
NSN 6610-01-323-0901
NSN 5996-01-628-4657
NSN 5895-00-006-6366
NSN 2925-00-771-7521
NSN 5915-00-552-4355
NSN 6320-00-636-0922