A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-00-251-5013
NSN 5975-01-309-6463
NSN 7035-01-105-7776
NSN 6685-00-982-6057
NSN 6620-01-124-0947
NSN 6685-00-132-5126
NSN 5925-00-111-5063
NSN 5905-00-147-3208
NSN 5965-00-408-5501
NSN 5998-01-340-5331
NSN 6150-01-062-7540
NSN 6135-00-240-3200