A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6105-01-556-4228
NSN 5985-01-266-4820
NSN 5985-00-983-4751
NSN 5910-00-112-8668
NSN 6145-00-842-1952
NSN 5855-00-560-0110
NSN 5950-00-501-0465
NSN 5905-00-913-0796
NSN 5895-01-383-7220
NSN 6105-01-452-6967
NSN 5915-01-312-6715
NSN 6240-01-551-7067