End item application gear assembly
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5915-01-242-7524
NSN 2925-01-267-1598
NSN 6220-00-157-5009
NSN 5965-00-959-4910
NSN 5996-01-534-2175
NSN 5920-00-730-8541
NSN 6135-00-027-3914
NSN 5975-01-089-4408
NSN 4140-01-100-1223
NSN 6320-01-624-0193
NSN 5915-00-615-9537
NSN 5945-00-766-4526