No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6320-00-937-5625
NSN 6320-01-345-5818
NSN 4140-01-621-0916
NSN 6620-01-606-8964
NSN 5996-01-287-8311
NSN 2925-01-161-7440
NSN 6610-01-393-1141
NSN 6685-01-544-6067
NSN 5998-01-126-6570
NSN 6645-00-527-6531
NSN 6620-01-643-5531
NSN 6650-00-495-5210