No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5895-01-272-9740
NSN 5975-00-310-1099
NSN 5930-01-068-3641
NSN 5935-00-225-3938
NSN 5985-01-577-5973
NSN 5910-01-250-2371
NSN 2925-00-589-7640
NSN 6135-01-294-2131
NSN 5999-00-035-9288
NSN 5920-01-265-7679
NSN 6135-01-205-5965
NSN 5855-01-068-3683