First end has a protusion 0.240 in. Diameter and 0.205 lg
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5930-00-393-1822
NSN 6320-00-456-0836
NSN 5895-01-050-8392
NSN 6110-00-794-2967
NSN 6645-00-958-5299
NSN 5935-01-605-1801
NSN 5930-01-623-6122
NSN 5855-01-006-1827
NSN 5905-01-080-7189
NSN 6320-00-225-7013
NSN 4140-01-141-6526
NSN 5996-01-519-3843