No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5999-01-401-5322
NSN 5960-00-099-9790
NSN 5835-01-043-1576
NSN 6130-01-389-6937
NSN 5910-01-327-3330
NSN 5965-01-408-6218
NSN 6145-00-275-4046
NSN 6620-01-292-2815
NSN 6135-00-932-3136
NSN 6105-01-370-4267
NSN 5960-01-416-6187
NSN 6130-01-111-4065