No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6135-00-276-7625
NSN 6320-01-582-6668
NSN 5975-00-110-8148
NSN 6150-01-364-0988
NSN 2925-01-599-1901
NSN 4140-00-231-1475
NSN 6645-00-371-1861
NSN 5975-01-130-4268
NSN 5945-01-394-9482
NSN 5945-00-862-3979
NSN 5920-00-589-2710
NSN 5835-01-375-8930