No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5960-01-450-8539
NSN 6320-01-281-6028
NSN 6320-01-422-1212
NSN 5930-01-360-5094
NSN 5999-01-224-6651
NSN 6105-00-760-8204
NSN 5985-00-642-1083
NSN 5950-01-039-7913
NSN 6105-00-141-5598
NSN 6110-00-735-2267
NSN 6685-00-024-1109
NSN 5915-01-069-8769