No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 2925-01-407-3032
NSN 5905-01-649-8803
NSN 6685-01-430-2447
NSN 5985-01-503-1764
NSN 7035-01-544-1302
NSN 6685-01-315-0661
NSN 2925-01-288-2091
NSN 2925-01-027-1293
NSN 5945-00-999-0238
NSN 5920-01-450-0614
NSN 5950-00-913-3452
NSN 5975-01-241-6393