No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5945-01-460-9115
NSN 4140-01-227-1342
NSN 5905-01-261-6786
NSN 6135-00-990-1822
NSN 6135-01-299-0778
NSN 6320-00-643-0958
NSN 5935-01-235-2873
NSN 5960-01-580-6360
NSN 5930-01-012-5617
NSN 5996-01-048-7758
NSN 6110-01-586-8963
NSN 6145-01-563-7112