No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6685-01-512-2014
NSN 6145-01-392-8938
NSN 5920-01-394-3826
NSN 5910-01-533-6777
NSN 6110-01-449-2685
NSN 5965-00-387-6880
NSN 5998-00-284-3804
NSN 5925-00-335-6321
NSN 5920-00-907-5003
NSN 6130-00-141-0292
NSN 5985-01-121-4084
NSN 5895-00-111-1560