A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6105-00-008-6140
NSN 5935-00-852-3367
NSN 5965-00-964-1756
NSN 5905-01-545-4218
NSN 5855-01-512-1926
NSN 6110-00-991-7000
NSN 5998-01-221-0647
NSN 5855-01-125-9167
NSN 5915-01-368-5668
NSN 2925-01-523-3607
NSN 4140-01-055-4705
NSN 2925-00-441-8252