No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6240-01-545-2408
NSN 6620-00-810-6774
NSN 6240-00-239-0159
NSN 4140-01-495-2216
NSN 6240-00-409-8670
NSN 6320-01-476-0686
NSN 6130-01-423-0270
NSN 4140-01-295-0645
NSN 7035-01-145-5059
NSN 6620-01-032-3937
NSN 5895-01-578-1833
NSN 5910-00-225-5220