No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6150-01-020-2569
NSN 5975-01-364-1666
NSN 6620-01-290-0197
NSN 5975-01-231-8967
NSN 5999-01-437-5705
NSN 5835-01-459-7428
NSN 5930-01-338-9499
NSN 6610-00-622-6227
NSN 5920-01-075-9273
NSN 5925-00-542-7792
NSN 4140-01-260-5435
NSN 5930-01-427-3676