No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6610-01-509-0017
NSN 6145-00-419-3836
NSN 5915-00-001-2936
NSN 5960-01-343-5912
NSN 6240-01-476-7935
NSN 6220-00-827-7423
NSN 6240-01-592-4068
NSN 5999-01-056-4824
NSN 5965-01-080-4021
NSN 6240-01-047-2786
NSN 5935-01-415-4322
NSN 6220-00-141-0268