No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-00-233-7436
NSN 5895-00-089-9901
NSN 5950-01-212-8507
NSN 6620-01-084-5112
NSN 5990-00-451-7630
NSN 6620-01-488-6772
NSN 5835-01-502-9228
NSN 4140-01-323-8629
NSN 5945-01-350-3649
NSN 5996-00-601-6690
NSN 5985-00-277-7371
NSN 5930-01-442-5239