A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6320-01-125-3361
NSN 6240-00-101-0008
NSN 6105-01-512-1831
NSN 5998-01-576-9622
NSN 6645-00-663-8111
NSN 7035-01-462-1957
NSN 5905-00-816-9079
NSN 5965-01-302-8522
NSN 5975-00-509-2879
NSN 5920-00-930-4063
NSN 5925-01-629-3966
NSN 5996-01-601-4760