No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-00-300-3853
NSN 5990-01-332-6722
NSN 6135-01-142-6456
NSN 6650-01-141-1582
NSN 6610-00-419-0315
NSN 6320-01-585-8468
NSN 5975-01-102-1589
NSN 6220-01-434-1918
NSN 5998-00-060-3333
NSN 6220-00-610-0968
NSN 5985-01-653-4327
NSN 6320-00-394-8458