No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5945-01-031-3006
NSN 6150-01-645-6013
NSN 6130-01-540-9042
NSN 7035-01-595-5270
NSN 2925-01-446-6976
NSN 5965-01-633-8849
NSN 6220-01-557-6638
NSN 5990-01-472-2447
NSN 5998-00-253-4410
NSN 5905-01-145-4143
NSN 5895-00-467-5032
NSN 5935-00-382-2928