No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5965-00-170-5254
NSN 5999-00-358-1933
NSN 6610-01-531-6980
NSN 6610-00-498-5198
NSN 6145-01-547-4859
NSN 5950-00-274-7228
NSN 6610-01-027-8736
NSN 7035-01-045-7202
NSN 5990-01-538-6115
NSN 6320-01-338-6006
NSN 6130-01-428-1409
NSN 7035-01-218-4233