A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5895-00-156-7282
NSN 7035-00-193-2269
NSN 5835-00-523-0736
NSN 5999-01-501-4272
NSN 5990-01-212-2037
NSN 6320-01-125-3361
NSN 6240-00-972-0904
NSN 5960-01-036-6320
NSN 5910-01-587-8488
NSN 6645-01-602-0000
NSN 6105-01-340-5242
NSN 5990-01-249-2060