Steering parts-pdi 46quantity type 4 each.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 5965-01-599-7409
NSN 6320-01-466-4175
NSN 6240-00-051-5163
NSN 6685-00-265-0912
NSN 5960-01-177-7406
NSN 6150-00-419-0505
NSN 5905-00-214-1613
NSN 6685-01-587-5248
NSN 5965-01-313-3845
NSN 2925-01-146-0278
NSN 5855-01-197-2774
NSN 5990-00-020-1048